- Highest Amperage for 9V Alkaline: 1100mAh
- Answer exactly to specific needs of loaders (special curve of discharge)
- Most advanced paintball batteries you could find in the market
- Developed for all the milsim war games and extreme outside conditions of game
Paintball Gun Parts – Tippmann-Spyder-Empire-BT, First Strike and Milsig paintball gun spares and factory replacement parts. We offer a on site Tippmann Tech center at our showroom – to help you with all your needs and questions – OEM replacement parts, parts kits and more.
If you can’t find what you are looking for, contact us, and if the part is available, we can get it for you.
One of South Africa’s largest inventory of parts
Certified Tippmann warranty center and Tech Center everything you need for your paintball gun maintenance and more.
- Standard Milsig Hopper adapter for feeding paintballs or other security rounds.RECEIVER 4 PART #18a, 18B, 12C, 18D Compleat
- Regulator Assembly for the Tippmann TiPX and Tippmann TCR#TA20102 or #TA20123
- Tippmann TIPX Front Bolt, A replacement part for the TIPX pistolPart Number TA20109
- Front bolt spring for the Tippmann TiPX
OR
Compression Spring for Tippmann TCR - CO2 end cap for the Tippmann TiPX and TPX that holds your 12g CO2 cartridge in place inside your marker.
- Cyclone feed paddles for force feeding your rounds. Only compatible with the Cyclone feed system
- This is For Tippmann 98, A5 and X7 Phenom Responsive Trigger Systems1/16 INCH (PART# 20-07)
- Tippmann X7 Phenom CFS Hose Fitting Assembly - Part TA30027Includes hose and spring cover
- Tombstone latch replacement part for the Tippmann A5 w/ss 2011 and up
- Includes:
- 3 x Body screws + bolts
- 1 x cyclone feed set screw
- 2 x Cyclone Feed base plate screws
- 2 x Push Pin
- 1 x Front grip bolt
- A rear bolt drive spring for the A5, 98 Custom and X7 etc
- This is the power tube all by itself. The internal parts (the valve) are not included.Plastic factory replacement part.
- The ball latch holds your rounds in place in your marker before shooting and prevents them from falling out of the barrel. For BT and Tippmann markers
- The latch that clips to the front sight and holds the feed elbow in the vertical position.
- Tippmann A5 end cap that replaces a buttstock for greater maneuverability. A strap/sling can also be attached to this to take the extra weight off of your arms
- Tippmann Sierra One end cap that replaces the buttstock for greater maneuverability.
- Replacement end cap for the Tippmann X7 Phenom. Attach this part to the end of your marker in place of a buttstock. Strap can be attached
- The screw in sling mount enables you to attach a sling to your marker to enable you to carry your marker whilst in game which can be extremely helpful
- Front grip for the A5 that slides onto the picatiny rail for improved accuracy and stability while firing, a great accessory!
- This small replacement spring is for the Cyclone hoppers' lid only
- Tippmann Cronus front and rear sight set.
- Fits any 21mm weaver rail system,
- Can be used on different guns like TMC, Sierra one, Milsig etc